SHIM (PKG. 1 PKG=3EA)
P/N F62C1014-3
P/N 2924-3
NSN 5365 01 030 4990
MFG PARKER HANNIFIN
 
NEW GOV SURPLUS
 
ITEM NAME   SHIM
DEFINITION  A thin flat metal or plastic item of various peripheral shapes having
             a solid or laminated cross-section. It is designed to maintain a
             predetermined distance between two surfaces. For round items without a
             hole and having a solid rectangular cross-section use DISK, SOLID,
             PLAIN. Items with either (1) a solid (not laminated) cross-section, or
             (2) a non-separable laminated cross-section with one hole centrally
             located, must have a thickness less than 0.006 inch (0.152 mm) for
             items less than 1/4 inch (6.35 mm) outside diameter or shortest
             distance across peripheral flats, and less than 0.016 inch (0.406 mm)
             for items 1/4 inch (6.35 mm) or more outside diameter, or shortest
             distance across peripheral flats.  For items with thickness greater
             than those indicated above, see SPACER, PLATE; WASHER, FLAT and
             SPACER, RING.  When thickness and/or outside diameter or shortest
             distance across peripheral flats is designated as a tolerance
             dimension, the maximum dimension will be used to determine compliance.
             See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and
             BEARING, WASHER, THRUST.
            
 
CHARACTERISTIC                          VALUE
OUTSIDE DIAMETER                        0.570 INCHES NOMINAL                             
APERTURE DIAMETER                       0.255 INCHES MINIMUM AND 0.260 INCHES MAXIMUM    
CONSTRUCTION                            ONE-PIECE                                        
MATERIAL                                STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 304
MATERIAL DOCUMENT AND                   MIL-S-5059 MIL SPEC ALL MATERIAL RESPONSES       
CLASSIFICATION                                                                           
SURFACE TREATMENT                       PASSIVATE                                        
DESIGN CONTROL REFERENCE                F62C1014-3                                       
THE MANUFACTURERS DATA                  3H889                                            
MANUFACTURERS CODE                                                                       
SURFACE TREATMENT DOCUMENT              ES-F59-2,FSCM 92003 MFR REF SINGLE TREATMENT     
AND CLASSIFICATION                      RESPONSE