WASHER
P/N 51002
NSN 5310 00 034 7357
MFG WATEROUS COMPANY

NEW GOV SURPLUS
SUPPLIER CAGE CODE 03EF7
ITEM NAME:   WASHER,FLAT
DEFINITION:  A washer having a centrally located hole with a solid or laminated

             cross-section and two flat parallel bearing surfaces. The hole must be

             75 percent or less than the largest dimension and the bearing surface

             finish is greater than 32 microinch (0.8 micrometer). The thickness

             cannot exceed 25 percent of the largest outside dimension. When the

             largest outside dimension is less than 1/4 inch or 6mm, the thickness

             must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm)

             or larger, the thickness must be 0.016 inches (0.4mm) or greater. The

             maximum tolerance is applied to dimensions and used as a determining

             factor. Items with separable lamination use SHIM. For items fabricated

             from ceramic or electrically rated materials by specification or

             industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE,

             graphite impregnated and lubricated items.

            
CHARACTERISTIC                          VALUE
CROSS-SECTIONAL SHAPE STYLE             RECTANGULAR                                      
HOLE DIAMETER                           0.938 INCHES NOMINAL                             
PERIPHERAL SHAPE STYLE                  ROUND                                            
CENTER HOLE SHAPE STYLE                 ROUND                                            
THICKNESS                               0.039 INCHES NOMINAL                             
OVERALL DIAMETER                        2.375 INCHES NOMINAL                             
MATERIAL                                STEEL OVERALL