GASKET
P/N 124556
P/N S8P494
PN 32-58070-35
NSN 5330 00 815 7334
MFG PARKER HANNIFIN
NEW GOV SURPLUS

SUPPLIER CAGE CODE 03EF7

 

ITEM NAME:   GASKET

DEFINITION:  A deformable material which prevents the passage of matter through the

             joint formed when two faces are joined. It may be metallic or

             nonmetallic, lubricated or impregnated, solid or hollow cross section.

             It may be made to any predetermined dimension and shape. Excludes flat

             disks, items made of felt material and items having joints. For round

             metal and plastic items with an aperture and a solid rectangular cross

             section, see WASHER, FLAT; SHIM; BEARING, WASHER, THRUST; and SPACER

             RING. Excludes DISK, VALVE; SEAL, NONMETALLIC ANGLE; SEAL, NONMETALLIC

             CHANNEL; SEAL, NONMETALLIC SPECIAL SHAPED SECTION; SHIELDING GASKET,

             ELECTRONIC; and RING, SEALING JAR.

            

 

CHARACTERISTIC                          VALUE

CROSS-SECTIONAL SHAPE STYLE             METAL AND SYNTHETIC RUBBER                        

OVERALL LENGTH                          2.512 INCHES NOMINAL                             

OVERALL WIDTH                           2.512 INCHES NOMINAL                             

APERTURE DIAMETER                       1.400 INCHES NOMINAL                              

OUTSIDE CORNER RADIUS                   0.380 INCHES NOMINAL                             

CENTER TO CENTER DISTANCE               1.752 INCHES NOMINAL                             

BETWEEN BOLT HOLES ALONG                                                                  

WIDTH                                                                                    

CENTER TO CENTER DISTANCE               1.752 INCHES NOMINAL                             

BETWEEN BOLT HOLES ALONG                                                                  

LENGTH                                                                                   

OUTSIDE EDGE TO BOLT HOLE               0.380 INCHES NOMINAL                             

CENTER DISTANCE ALONG WIDTH                                                              

OUTSIDE EDGE TO BOLT HOLE               0.380 INCHES NOMINAL                             

CENTER DISTANCE ALONG                                                                    

LENGTH                                                                                   

CROSS-SECTIONAL THICKNESS               0.120 INCHES NOMINAL                             

GAGE RING THICKNESS                     0.080 INCHES NOMINAL                              

III END ITEM IDENTIFICATION             W/S: AIRCRAFT, PHANTOM F-4; AIRCRAFT, STRATOLIFTER

                                        C-135; F4N AIRCRAFT; F4S AIRCRAFT; CONSOLIDATED  

                                        TARGETS; AIRCRAFT, F-16                          

SURFACE TREATMENT                       ANODIZE OVERALL                                  

DESIGN CONTROL REFERENCE                32-58070-35                                      

THE MANUFACTURERS DATA                  76301                                            

MANUFACTURERS CODE                                                                       

SURFACE TREATMENT DOCUMENT              MIL-A-8625,TY 2 MIL SPEC SINGLE TREATMENT RESPONSE

AND CLASSIFICATION                      OVERALL                                          

III FSC APPLICATION DATA                FUEL LINES,FABRICATED,AIRFRAME