SHIM
P/N: F62C1014-1
PN 2924-1
NSN 5365 01 030 4987
MFG PARKER HANNIFIN

 

NEW GOV SURPLUS

SUPPLIER CAGE CODE 03EF7

 

ITEM NAME:   SHIM

DEFINITION:  A thin flat metal or plastic item of various peripheral shapes having

             a solid or laminated cross-section. It is designed to maintain a

             predetermined distance between two surfaces. For round items without a

             hole and having a solid rectangular cross-section use DISK, SOLID,

             PLAIN. Items with either (1) a solid (not laminated) cross-section, or

             (2) a non-separable laminated cross-section with one hole centrally

             located, must have a thickness less than 0.006 inch (0.152 mm) for

             items less than 1/4 inch (6.35 mm) outside diameter or shortest

             distance across peripheral flats, and less than 0.016 inch (0.406 mm)

             for items 1/4 inch (6.35 mm) or more outside diameter, or shortest

             distance across peripheral flats.  For items with thickness greater

             than those indicated above, see SPACER, PLATE; WASHER, FLAT and

             SPACER, RING.  When thickness and/or outside diameter or shortest

             distance across peripheral flats is designated as a tolerance

             dimension, the maximum dimension will be used to determine compliance.

             See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and

             BEARING, WASHER, THRUST.

            

 

CHARACTERISTIC                          VALUE

OUTSIDE DIAMETER                        0.570 INCHES NOMINAL                              

APERTURE DIAMETER                       0.255 INCHES MINIMUM AND 0.260 INCHES MAXIMUM    

CONSTRUCTION                            ONE-PIECE                                        

MATERIAL                                STEEL COMP 301 OR STEEL COMP 302 OR STEEL COMP 304

MATERIAL DOCUMENT AND                   MIL-S-5059 MIL SPEC ALL MATERIAL RESPONSES       

CLASSIFICATION                                                                           

SURFACE TREATMENT                       PASSIVATE                                        

SURFACE TREATMENT DOCUMENT              EW-F59-2,CAGEC 92003 MFR REF SINGLE TREATMENT    

AND CLASSIFICATION                      RESPONSE                                         

STYLE DESIGNATOR                        CIRCULAR