SHIM
P/N 204-011-147-1
PN 5365007583674
NSN 5365 00 758 3674
MFG BELL HELICOPTER
 
NEW GOV SURPLUS
SUPPLIER CAGE CODE 03EF7
 
ITEM NAME:   SHIM
DEFINITION:  A thin flat metal or plastic item of various peripheral shapes having
             a solid or laminated cross-section. It is designed to maintain a
             predetermined distance between two surfaces. For round items without a
             hole and having a solid rectangular cross-section use DISK, SOLID,
             PLAIN. Items with either (1) a solid (not laminated) cross-section, or
             (2) a non-separable laminated cross-section with one hole centrally
             located, must have a thickness less than 0.006 inch (0.152 mm) for
             items less than 1/4 inch (6.35 mm) outside diameter or shortest
             distance across peripheral flats, and less than 0.016 inch (0.406 mm)
             for items 1/4 inch (6.35 mm) or more outside diameter, or shortest
             distance across peripheral flats.  For items with thickness greater
             than those indicated above, see SPACER, PLATE; WASHER, FLAT and
             SPACER, RING.  When thickness and/or outside diameter or shortest
             distance across peripheral flats is designated as a tolerance
             dimension, the maximum dimension will be used to determine compliance.
             See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and
             BEARING, WASHER, THRUST.
            
 
CHARACTERISTIC                          VALUE
HOLE DIAMETER                           0.342 INCHES MINIMUM AND 0.348 INCHES MAXIMUM    
OVERALL LENGTH                          3.530 INCHES NOMINAL                             
OVERALL WIDTH                           0.750 INCHES NOMINAL                              
OUTSIDE CORNER BEVEL LENGTH             0.250 INCHES NOMINAL                             
ALONG WIDTH                                                                              
OUTSIDE CORNER BEVEL LENGTH             0.250 INCHES NOMINAL                             
ALONG LENGTH                                                                             
CENTER TO CENTER DISTANCE               2.800 INCHES NOMINAL                             
BETWEEN BOLT HOLES ALONG                                                                  
LENGTH                                                                                   
OUTSIDE EDGE TO BOLT HOLE               0.365 INCHES NOMINAL                             
CENTER DISTANCE ALONG WIDTH                                                              
OUTSIDE EDGE TO BOLT HOLE               0.375 INCHES NOMINAL                             
CENTER DISTANCE ALONG                                                                    
LENGTH                                                                                   
BOLT HOLE QUANTITY                      2                                                
LAMINATION THICKNESS                    0.003 INCHES NOMINAL                              
FEATURES PROVIDED                       SEPARABLE                                        
CONSTRUCTION                            LAMINATED                                        
MATERIAL                                ALUMINUM                                          
DESIGN CONTROL REFERENCE                204-011-147-1                                    
THE MANUFACTURERS DATA                  97499                                            
MANUFACTURERS CODE                                                                        
III FSC APPLICATION DATA                ROTOR BLADE TRUNNION,HELICOPTER