WASHER
P/N LS5984D6L
PN AN960-616L
PN AN960D1016
PN AN960PD616L
PN 100880004
PN 911336
PN 911337
NSN 5310-00-187-2395
$10 EA HD
MFG LOCKHEED AMRTIN
 
NEW GOV SURPLUS
SUPPLIER CAGE CODE 03EF7
 
ITEM NAME:   WASHER,FLAT
DEFINITION:  A washer having a centrally located hole with a solid or laminated
             cross-section and two flat parallel bearing surfaces. The hole must be
             75 percent or less than the largest dimension and the bearing surface
             finish is greater than 32 microinch (0.8 micrometer). The thickness
             cannot exceed 25 percent of the largest outside dimension. When the
             largest outside dimension is less than 1/4 inch or 6mm, the thickness
             must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm)
             or larger, the thickness must be 0.016 inches (0.4mm) or greater. The
             maximum tolerance is applied to dimensions and used as a determining
             factor. Items with separable lamination use SHIM. For items fabricated
             from ceramic or electrically rated materials by specification or
             industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE,
             graphite impregnated and lubricated items.
            
 
CHARACTERISTIC                          VALUE
CROSS-SECTIONAL SHAPE STYLE             RECTANGULAR                                      
HOLE DIAMETER                           0.380 INCHES MINIMUM AND 0.400 INCHES MAXIMUM    
PERIPHERAL SHAPE STYLE                  ROUND                                            
CENTER HOLE SHAPE STYLE                 1 ROUND                                           
THICKNESS                               0.013 INCHES MINIMUM AND 0.019 INCHES MAXIMUM    
OVERALL DIAMETER                        0.620 INCHES MINIMUM AND 0.645 INCHES MAXIMUM    
MATERIAL                                ALUMINUM ALLOY 2024 OVERALL                      
MATERIAL DOCUMENT AND                   QQ-A-250/5 FED SPEC SINGLE MATERIAL RESPONSE     
CLASSIFICATION                          OVERALL                                          
SURFACE TREATMENT                       CHROMATE OR ANODIZE OVERALL                      
DEFINITIVE GOVERNMENT                   AN960PD616L                                      
SPEC/STD REFERENCE                                                                       
SPEC/STD CONTROLLING DATA               88044                                            
MANUFACTURERS CODE                                                                       
SURFACE TREATMENT DOCUMENT              MIL-C-5541 MIL SPEC 1ST TREATMENT RESPONSE OR    
AND CLASSIFICATION                      MIL-A-8625 MIL SPEC 2ND TREATMENT RESPONSE OVERALL