PLATE SPACER
P/N 74A835758-2015
PN 10186458
NSN 5365-01-119-9183
MFG BOEING
 
NEW GOV SURPLUS
SUPPLIER CAGE CODE 03EF7
 
ITEM NAME:   SPACER,PLATE
DEFINITION:  A flat metal or plastic item of various peripheral shapes having a
             solid (not laminated) cross-section. It is designed to maintain a
             predetermined distance between two surfaces. For round items without a
             hole having a solid rectangular cross-section use DISK, SOLID, PLAIN.
             For round or hexagonal items with only one hole centrally located and
             with the length (thickness) exceeding 25 percent of the outside
             diameter or distance across peripheral flats, see SPACER, SLEEVE. The
             thickness between the two parallel bearing surfaces must be 0.006
             inch, (0.152 mm) or more for items less than 1/4 inch (6.35 mm) across
             the peripheral diameter, or smallest overall outside dimension, or
             must be 0.016 inch (0.406 mm) or more for items 1/4 inch (6.35 mm) or
             greater across the peripheral diameter or smallest overall outside
             dimension. For items with a thickness less than those indicated above,
             see SHIM. For items with one hole centrally located conforming to the
             above dimensional criteria use WASHER, FLAT or SPACER, RING as
             applicable. When thickness and/or outside diameter or smallest overall
             outside dimension is designated as a tolerance/dimension the maximum
             dimension will be used to determine compliance. Excludes GASKET;
             INSULATOR (as modified) and MOUNTING PAD, ELECTRICAL-ELECTRONIC
             COMPONENT.
            
 
CHARACTERISTIC                          VALUE
HOLE DIAMETER                           0.312 INCHES MINIMUM AND 0.319 INCHES MAXIMUM    
OVERALL LENGTH                          2.680 INCHES NOMINAL                             
OVERALL WIDTH                           1.480 INCHES NOMINAL                             
CENTER TO CENTER DISTANCE               1.250 INCHES NOMINAL                             
BETWEEN BOLT HOLES ALONG                                                                 
LENGTH                                                                                   
OUTSIDE EDGE TO BOLT HOLE               0.715 INCHES NOMINAL                             
CENTER DISTANCE ALONG                                                                    
LENGTH                                                                                   
BOLT HOLE CENTERLINE TO                 0.740 INCHES NOMINAL                             
NEAREST EDGE DISTANCE                                                                    
BOLT HOLE QUANTITY                      2                                                 
MATERIAL                                TITANIUM ALLOY                                   
STYLE DESIGNATOR                        NON-CIRCULAR W/SQUARE CORNERS