SCREW
P/N LE111-0002-4015
P/N CA2193-4-15
NSN 5305-01-186-9286
MFG BOEING
 
NEW GOV SURPLUS
SUPPLIER CAGE CODE 03EF7
 
ITEM NAME:   SCREW,CLOSE TOLERAN
DEFINITION:  A SCREW, MACHINE or SCREW, CAP, SOCKET HEAD whose unthreaded portion
             is of specified grip length, plated or unplated, and is machined to a
             tolerance of one thousandth (0.001 IN.) (0.025 mm) or less of a
             specific diameter for items (1.000 IN.) (25 mm) or less in diameter.
             Items over (1.000 IN.) (25 mm) in diameter shall have a tolerance of
             fifteen ten thousandths (0.0015 IN.) (0.038 mm) or less. The nominal
             major diameter of the threads shall be at least one thousandth (0.001
             IN.) (0.025 mm) below the minimum shank diameter, but not below the
             minimum major diameter for applicable class of fit, as shown in the
             Screw Thread Standards, FED STD H28 and/or other nationally recognized
             standards. The head is designed to be held or driven with an inserted
             driver. It is not designed for rotation by the thumb and fingers. A
             locking feature may be incorporated in the design of the head or
             threads.
            
 
CHARACTERISTIC                          VALUE
THREAD CLASS                            3A                                               
THREAD DIRECTION                        RIGHT-HAND                                       
THREAD LENGTH                           0.515 INCHES MINIMUM AND 0.555 INCHES MAXIMUM    
FASTENER LENGTH                         1.463 INCHES MINIMUM AND 1.483 INCHES MAXIMUM    
HEAD STYLE                              FLAT COUNTERSUNK                                 
HEAD DIAMETER                           0.508 INCHES MAXIMUM                             
GRIP DIAMETER                           0.2490 INCHES MINIMUM AND 0.2495 INCHES MAXIMUM  
INTERNAL DRIVE STYLE                    HEXAGON                                          
NOMINAL THREAD DIAMETER                 0.250 INCHES                                     
GRIP LENGTH                             0.928 INCHES MINIMUM AND 0.948 INCHES MAXIMUM    
WIDTH ACROSS FLATS                      0.1565 INCHES MINIMUM AND 0.1587 INCHES MAXIMUM  
THREAD QUANTITY PER INCH                28                                               
MINIMUM TENSILE STRENGTH                160000 POUNDS PER SQUARE INCH                    
COUNTERSINK ANGLE                       100.0 DEGREES NOMINAL                             
SURFACE FINISH                          32.0 MICROINCHES BEARING SURFACE OF HEAD 32.0    
                                        MICROINCHES GRIP 32.0 MICROINCHES THREADS        
SPECIAL FEATURES                        3 KEYWAYS 1.317 IN. MIN. AND 1.347 IN. MAX       
                                        LONG,0.040 IN. MIN AND 0.044 IN. MAX WIDE MACHINED
                                        IN SHANK,BORE MACHINED IN THREAD END TO RECEIVE  
                                        PLUG                                             
MATERIAL                                IRON ALLOY 660 OVERALL                           
MATERIAL DOCUMENT AND                   AMS 5732 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
CLASSIFICATION                                                                            
SURFACE TREATMENT                       PASSIVATE OVERALL                                
SURFACE TREATMENT DOCUMENT              QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
AND CLASSIFICATION                                                                       
THREAD SERIES DESIGNATOR                UNJF