HOSE ASSEMBLY
P/N 147-51059-1
P/N 10-20051-67
P/N 647039-1
NSN 4720 00 628 6596
MFG DESIGNED METAL
 
NEW GOV SURPLUS
SUPPLIER CAGE CODE 03EF7
 
ITEM NAME   HOSE ASSEMBLY,NONME
DEFINITION  A length of nonmetallic hose with fittings on one or both ends. For
             items without fittings, see HOSE, NONMETALLIC. Excludes HOSE ASSEMBLY,
             AIR DUCT; and HOSE ASSEMBLY, AIR DUCT, AIR BREATHING.
            
 
CHARACTERISTIC                          VALUE
CROSS-SECTIONAL SHAPE STYLE             ROUND                                             
INSIDE DIAMETER                         1.375 INCHES NOMINAL                             
TEMP RATING                             -65.0 DEG FAHRENHEIT AND 160.0 DEG FAHRENHEIT    
                                        SINGLE RESPONSE                                  
FLANGE THICKNESS                        0.188 INCHES NOMINAL 1ST END 0.188 INCHES NOMINAL
                                        2ND END                                          
OUTSIDE DIAMETER                        1.695 INCHES NOMINAL                             
MINIMUM INSIDE BENDING                  11.000 INCHES                                    
RADIUS                                                                                   
CENTER TO CENTER DISTANCE               2.375 INCHES NOMINAL 1ST END 1.812 INCHES NOMINAL
BETWEEN BOLT HOLES ALONG                2ND END                                          
WIDTH                                                                                     
CENTER TO CENTER DISTANCE               2.375 INCHES NOMINAL 1ST END 1.812 INCHES NOMINAL
BETWEEN BOLT HOLES ALONG                2ND END                                          
LENGTH                                                                                    
BOLT HOLE QUANTITY                      4 1ST END 4 2ND END                              
FLANGE LENGTH                           3.000 INCHES NOMINAL 1ST END 2.375 INCHES NOMINAL
                                        2ND END                                          
FLANGE WIDTH                            3.000 INCHES NOMINAL 1ST END 2.375 INCHES NOMINAL
                                        2ND END                                          
CONNECTION STYLE                        RAISED SWIVEL 1ST END RAISED SWIVEL 2ND END      
BOLT HOLE DIAMETER                      0.328 INCHES NOMINAL 1ST END 0.266 INCHES NOMINAL
                                        2ND END                                          
RAISED FACE HEIGHT                      0.015 INCHES NOMINAL 1ST END 0.015 INCHES NOMINAL
                                        2ND END                                          
RAISED FACE DIAMETER                    2.750 INCHES NOMINAL 1ST END 2.125 INCHES NOMINAL
                                        2ND END                                          
END FLANGE CONSTRUCTION                 SOLID 1ST END SOLID 2ND END                      
END CONNECTION DESIGN                   STRAIGHT 1ST END ELBOW 2ND END                   
CONNECTION TYPE                         RAISED FACE FLANGE 1ST END RAISED FACE FLANGE 2ND
                                        END                                              
FEATURES PROVIDED                       REUSABLE END FITTINGS                            
BURST TEST PRESSURE                     720.0 POUNDS PER SQUARE INCH                     
LAYER COMPOSITION AND                   1ST LAYER BRAIDED COTTON CORD AND 2ND LAYER      
LOCATION                                BRAIDED STEEL WIRE AND OUTER LAYER RUBBER        
                                        IMPREGNATED BRAIDED COTTON CORD                  
MAXIMUM OPERATING PRESSURE              120.0 POUNDS PER SQUARE INCH                     
HYDROSTATIC TEST PRESSURE               240.0 POUNDS PER SQUARE INCH                     
FLOW ANGLE                              5.0 DEGREES 2ND END                              
INSIDE SURFACE CONDITION                SMOOTH                                            
MEASURING METHOD AND LENGTH             15.010 INCHES NOMINAL WORKING                    
FLANGE STYLE                            RECTANGULAR (INCLUDES SQUARE) 1ST END RECTANGULAR
                                        (INCLUDES SQUARE) 2ND END                        
SPECIAL FEATURES                        FLANGE ON FIRST END CONNECTED TO ALUMINUM ALLOY  
                                        DOUBLE ELBOW TUBING WHICH BTINGS THE FLANGE      
                                        CONNECTION PARALLEL TO THE RUN OF THE HOSE       
DESIGN CONTROL REFERENCE                647039-1                                         
THE MANUFACTURERS DATA                  00624