WASHER
P/N 715010
P/N L33763
NSN 5310 01 065 5948
MFG PARKER HANNIFIN
 
NEW GOV SURPLUS
SUPPLIER CAGE CODE 03EF7
 
ITEM NAME   WASHER,FLAT
DEFINITION  A washer having a centrally located hole with a solid or laminated
             cross-section and two flat parallel bearing surfaces. The hole must be
             75 percent or less than the largest dimension and the bearing surface
             finish is greater than 32 micro inch (0.8 micrometer). The thickness
             cannot exceed 25 percent of the largest outside dimension. When the
             largest outside dimension is less than 1/4 inch or 6mm, the thickness
             must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm)
             or larger, the thickness must be 0.016 inches (0.4mm) or greater. The
             maximum tolerance is applied to dimensions and used as a determining
             factor. Items with separable lamination use SHIM. For items fabricated
             from ceramic or electrically rated materials by specification or
             industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE,
             graphite impregnated and lubricated items.
            
 
CHARACTERISTIC                          VALUE
CROSS-SECTIONAL SHAPE STYLE             RECTANGULAR                                      
HOLE DIAMETER                           0.445 INCHES MINIMUM AND 0.450 INCHES MAXIMUM    
PERIPHERAL SHAPE STYLE                  ROUND                                            
CENTER HOLE SHAPE STYLE                 ROUND                                             
THICKNESS                               0.185 INCHES MINIMUM AND 0.195 INCHES MAXIMUM    
OVERALL DIAMETER                        1.594 INCHES MINIMUM AND 1.599 INCHES MAXIMUM    
SURFACE FINISH                          32.0 MICROINCHES TOP 32.0 MICROINCHES BOTTOM     
MATERIAL                                STEEL COMP 1212 OR STEEL COMP 1215 OVERALL       
SURFACE TREATMENT                       CADMIUM OVERALL                                  
DESIGN CONTROL REFERENCE                715010                                            
THE MANUFACTURERS DATA                  45681