SHIM
P/N F62C1360-3
NSN 5365 01 031 5275
MFG PARKER HANNIFIN
 
NEW GOV SURPLUS
SUPPLIER CAGE CODE 03EF7
 
ITEM NAME   SHIM
DEFINITION  A thin flat metal or plastic item of various peripheral shapes having
             a solid or laminated cross-section. It is designed to maintain a
             predetermined distance between two surfaces. For round items without a
             hole and having a solid rectangular cross-section use DISK, SOLID,
             PLAIN. Items with either (1) a solid (not laminated) cross-section, or
             (2) a non-separable laminated cross-section with one hole centrally
             located, must have a thickness less than 0.006 inch (0.152 mm) for
             items less than 1/4 inch (6.35 mm) outside diameter or shortest
             distance across peripheral flats, and less than 0.016 inch (0.406 mm)
             for items 1/4 inch (6.35 mm) or more outside diameter, or shortest
             distance across peripheral flats.  For items with thickness greater
             than those indicated above, see SPACER, PLATE; WASHER, FLAT and
             SPACER, RING.  When thickness and/or outside diameter or shortest
             distance across peripheral flats is designated as a tolerance
             dimension, the maximum dimension will be used to determine compliance.
             See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and
             BEARING, WASHER, THRUST.
            
 
CHARACTERISTIC                          VALUE
HOLE DIAMETER                           0.151 INCHES MINIMUM AND 0.161 INCHES MAXIMUM    
OVERALL LENGTH                          1.375 INCHES NOMINAL                             
OVERALL WIDTH                           1.000 INCHES NOMINAL                             
APERTURE DIAMETER                       0.635 INCHES MINIMUM AND 0.645 INCHES MAXIMUM    
OUTSIDE CORNER RADIUS                   0.060 INCHES NOMINAL                             
CENTER TO CENTER DISTANCE               0.745 INCHES MINIMUM AND 0.755 INCHES MAXIMUM    
BETWEEN BOLT HOLES ALONG                                                                 
WIDTH                                                                                     
CENTER TO CENTER DISTANCE               1.095 INCHES MINIMUM AND 1.105 INCHES MAXIMUM    
BETWEEN BOLT HOLES ALONG                                                                 
LENGTH                                                                                    
OUTSIDE EDGE TO BOLT HOLE               0.125 INCHES NOMINAL                             
CENTER DISTANCE ALONG WIDTH                                                              
OUTSIDE EDGE TO BOLT HOLE               0.138 INCHES NOMINAL                             
CENTER DISTANCE ALONG                                                                    
LENGTH                                                                                   
BOLT HOLE QUANTITY                      4                                                
CONSTRUCTION                            ONE-PIECE                                        
SPECIAL FEATURES                        SLOTTED ONE SIDE ALONG W 0.254 IN. W,0.265 IN.   
                                        DEEP                                             
MATERIAL                                STEEL COMP 301 OR STEEL COMP 302                 
MATERIAL DOCUMENT AND                   MIL-S-5059 MIL SPEC ALL MATERIAL RESPONSES       
CLASSIFICATION                                                                           
SURFACE TREATMENT                       PASSIVATE                                        
DESIGN CONTROL REFERENCE                F62C1360-3                                        
THE MANUFACTURERS DATA                  3H889                                            
MANUFACTURERS CODE                                                                       
SURFACE TREATMENT DOCUMENT              ES-F59-2,FSCM 92003 MFR REF SINGLE TREATMENT     
AND CLASSIFICATION                      RESPONSE