WASHER
P/N MS35333-82
NSN 5310 00 261 7157
MFG MILITARY STANDARDS
 
NEW GOV SURPLUS
SUPPLIER CAGE CODE 03EF7
 
ITEM NAME:   WASHER,LOCK
DEFINITION:  A washer which is usually round with a centrally located hole. Its
             edges and two bearing surfaces are so designed that applied pressure
             brings into play the spring tension and/or frictional locking
             principle which materially resists any tendency toward turning. It may
             be made of one or two pieces
            
 
CHARACTERISTIC                          VALUE
HOLE DIAMETER                           0.894 INCHES MINIMUM AND 0.927 INCHES MAXIMUM    
OUTSIDE DIAMETER                        1.364 INCHES MINIMUM AND 1.410 INCHES MAXIMUM    
MATERIAL THICKNESS                      0.052 INCHES MINIMUM AND 0.060 INCHES MAXIMUM    
HARDNESS RATING                         40.0 ROCKWELL C MINIMUM AND 50.0 ROCKWELL C      
                                        MAXIMUM                                           
MATERIAL                                STEEL COMP 410 OVERALL                           
MATERIAL DOCUMENT AND                   66 FED STD SINGLE MATERIAL RESPONSE OVERALL      
CLASSIFICATION                                                                            
SURFACE TREATMENT                       PASSIVATE OVERALL                                
DEFINITIVE GOVERNMENT                   MS35333-82                                       
SPEC/STD REFERENCE                                                                        
MANUFACTURERS CODE                      96906                                            
NON-DEFINITIVE GOVERNMENT               FF-W-100                                         
SPEC/STD REFERENCE                                                                        
SPEC/STD CONTROLLING DATA               81348                                            
MANUFACTURERS CODE                                                                       
SURFACE TREATMENT DOCUMENT              QQ-P-35,TY 2 OR TY 3 FED SPEC SINGLE TREATMENT   
AND CLASSIFICATION                      RESPONSE OVERALL                                 
STYLE DESIGNATOR                        FLAT INTERNAL TEETH                               
NONDEFINITIVE SPEC/STD DATA             2 COMPOSITION AND A GRADE AND 1 STYLE AND 1 TYPE