SHIM
P/N 204-011-162-1
NSN  5365 00 758 3676
MFG LOCKHEED MARTIN
 
NEW GOV SURPLUS
 
ITEM NAME   SHIM
DEFINITION  A thin flat metal or plastic item of various peripheral shapes having
             a solid or laminated cross-section. It is designed to maintain a
             predetermined distance between two surfaces. For round items without a
             hole and having a solid rectangular cross-section use DISK, SOLID,
             PLAIN. Items with either (1) a solid (not laminated) cross-section, or
             (2) a non-separable laminated cross-section with one hole centrally
             located, must have a thickness less than 0.006 inch (0.152 mm) for
             items less than 1/4 inch (6.35 mm) outside diameter or shortest
             distance across peripheral flats, and less than 0.016 inch (0.406 mm)
             for items 1/4 inch (6.35 mm) or more outside diameter, or shortest
             distance across peripheral flats.  For items with thickness greater
             than those indicated above, see SPACER, PLATE; WASHER, FLAT and
             SPACER, RING.  When thickness and/or outside diameter or shortest
             distance across peripheral flats is designated as a tolerance
             dimension, the maximum dimension will be used to determine compliance.
             See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and
             BEARING, WASHER, THRUST.
            
 
CHARACTERISTIC                          VALUE
HOLE DIAMETER                           0.375 INCHES NOMINAL                             
OVERALL LENGTH                          6.960 INCHES MINIMUM AND 6.970 INCHES MAXIMUM    
OVERALL WIDTH                           2.675 INCHES MINIMUM AND 2.685 INCHES MAXIMUM    
OUTSIDE CORNER RADIUS                   0.400 INCHES NOMINAL                              
CENTER TO CENTER DISTANCE               1.775 INCHES MINIMUM AND 1.785 INCHES MAXIMUM    
BETWEEN BOLT HOLES ALONG                                                                 
WIDTH                                                                                     
CENTER TO CENTER DISTANCE               3.080 INCHES MINIMUM AND 3.085 INCHES MAXIMUM    
BETWEEN BOLT HOLES ALONG                                                                 
LENGTH                                                                                    
OUTSIDE EDGE TO BOLT HOLE               0.400 INCHES NOMINAL                             
CENTER DISTANCE ALONG WIDTH                                                              
OUTSIDE EDGE TO BOLT HOLE               0.500 INCHES NOMINAL                             
CENTER DISTANCE ALONG                                                                    
LENGTH                                                                                   
BOLT HOLE QUANTITY                      3                                                
LAMINATION THICKNESS                    0.003 INCHES NOMINAL                             
FEATURES PROVIDED                       SEPARABLE                                         
CONSTRUCTION                            LAMINATED                                        
MATERIAL                                ALUMINUM                                         
DESIGN CONTROL REFERENCE                204-011-162-001                                   
THE MANUFACTURERS DATA                  97499                                            
MANUFACTURERS CODE                                                                       
III FSC APPLICATION DATA                ROTARY WING HEAD,HELICOPTER