SHIM
P/N 120-008C14E7
NSN 5365-01-285-9358
MFG BELL HELICOPTER
 
NEW GOV SURPLUS
SUPPLIER CAGE CODE 03EF7
 
ITEM NAME:   SHIM
DEFINITION:  A thin flat metal or plastic item of various peripheral shapes having
             a solid or laminated cross-section. It is designed to maintain a
             predetermined distance between two surfaces. For round items without a
             hole and having a solid rectangular cross-section use DISK, SOLID,
             PLAIN. Items with either (1) a solid (not laminated) cross-section, or
             (2) a non-separable laminated cross-section with one hole centrally
             located, must have a thickness less than 0.006 inch (0.152 mm) for
             items less than 1/4 inch (6.35 mm) outside diameter or shortest
             distance across peripheral flats, and less than 0.016 inch (0.406 mm)
             for items 1/4 inch (6.35 mm) or more outside diameter, or shortest
             distance across peripheral flats.  For items with thickness greater
             than those indicated above, see SPACER, PLATE; WASHER, FLAT and
             SPACER, RING.  When thickness and/or outside diameter or shortest
             distance across peripheral flats is designated as a tolerance
             dimension, the maximum dimension will be used to determine compliance.
             See also SHIM STOCK, LAMINATED; SHIM STOCK ASSORTMENT, GASKET; and
             BEARING, WASHER, THRUST.
            
 
CHARACTERISTIC                          VALUE
OUTSIDE DIAMETER                        0.428 INCHES MINIMUM AND 0.448 INCHES MAXIMUM    
APERTURE DIAMETER                       0.219 INCHES MINIMUM AND 0.229 INCHES MAXIMUM    
LAMINATION QUANTITY                     31                                               
LAMINATION THICKNESS                    0.002 INCHES NOMINAL                             
FEATURES PROVIDED                       SEPARABLE                                        
CONSTRUCTION                            LAMINATED                                        
MATERIAL                                STEEL COMP 302 OR STEEL COMP 301                 
MATERIAL DOCUMENT AND                   QQ-S-766,COND A FED SPEC 1ST MATERIAL RESPONSE OR
CLASSIFICATION                          MIL-S-5059,COND A MIL SPEC 1ST MATERIAL RESPONSE 
                                        OR AMS 5519 ASSN STD 2ND MATERIAL RESPONSE       
STYLE DESIGNATOR                        CIRCULAR