SHAFT
PN 007235-1
NSN 3040 01 201 5445
MFG MEGGITT
 
NEW GOV SURPLUS
SUPPLIER  CAGE CODE 03EF7
 
ITEM NAME   SHAFT,STRAIGHT
DEFINITION  A straight shaft having two or more of the following conditions: a
             specified surface finish designation in the range of 1 to 125
             micro inches (o.o25 to 3.2 micrometers), arithmetical average (aa),
             machined peripheral flat(s), circular groove (s), keyway(s), splines,
             threads, or holes. It is not designed for use in aligning by fitting
             into corresponding holes of another item. It may be drilled for
             lubricating holes. For items having an integral gear(s) or worm(s),
             see GEARSHAFT (as modified). For items designed to support rotating
             members see AXLE(1), STRAIGHT. For items not having the above
             conditions see PIN, STRAIGHT, HEADLESS. For items having machined ends
             which constitute steps see SHAFT(1), SHOULDERED; AXLE(1), SHOULDERED;
             and BOLT, FLUID PASSAGE.
            
 
CHARACTERISTIC                          VALUE
FIRST END STYLE                         SPLINED (INVOLUTE)                               
END SIMILARITY                          NOT IDENTICAL                                    
OVERALL LENGTH                          9.253 INCHES NOMINAL                             
FIRST END DIAMETER                      0.5152 INCHES NOMINAL                            
FIRST END SPLINE LENGTH                 7.065 INCHES NOMINAL                             
FIRST END SPLINE MINOR                  0.5150 INCHES NOMINAL                            
DIAMETER                                                                                 
FIRST END SPLINE MAJOR                  0.6237 INCHES MINIMUM AND 0.6242 INCHES MAXIMUM  
DIAMETER                                                                                 
FIRST END PRESSURE ANGLE                30.0 DEGREES NOMINAL                             
FIRST END PITCH DIAMETER                0.5833 INCHES NOMINAL                             
FIRST END SPLINE QUANTITY               14                                               
SURFACE FINISH                          125.0 MICROINCHES                                
SPECIAL FEATURES                        1 SPLINE TOOTH IS OMITTED; SPLINED END HAS       
                                        THREADED HOLE 90 DEG BY 0.260 IN DIA C'SK; THREADS
                                        PER 0.250-28UNF-3B 0.625 IN THREAD DEPTH; 1 END  
                                        HAS HEX NUT WITH DISTANCES BETWEEN OPPOSITE FLATS
                                        OF BETWEEN 0.740 IN AND 0.752 INCH               
MATERIAL                                STEEL CORROSION RESISTING                        
MATERIAL DOCUMENT AND                   AMS 5643 COND H-1150 17-4PH ASSN STD SINGLE      
CLASSIFICATION                          MATERIAL RESPONSE                                
DESIGN CONTROL REFERENCE                007235-1                                          
THE MANUFACTURERS DATA                  59027