FLAT WASHER
P/N 10876166
P/N 3004760
NSN 5310-00-753-8215
MFG US ARMY
 
NEW GOV SURPLUS
SUPPLIER CAGE CODE 03EF7
 
ITEM NAME:   WASHER,FLAT
DEFINITION:  A washer having a centrally located hole with a solid or laminated
             cross-section and two flat parallel bearing surfaces. The hole must be
             75 percent or less than the largest dimension and the bearing surface
             finish is greater than 32 microinch (0.8 micrometer). The thickness
             cannot exceed 25 percent of the largest outside dimension. When the
             largest outside dimension is less than 1/4 inch or 6mm, the thickness
             must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm)
             or larger, the thickness must be 0.016 inches (0.4mm) or greater. The
             maximum tolerance is applied to dimensions and used as a determining
             factor. Items with separable lamination use SHIM. For items fabricated
             from ceramic or electrically rated materials by specification or
             industry standards use INSULATOR (1), WASHER. Excludes DISK, VALVE,
             graphite impregnated and lubricated items.
            
 
CHARACTERISTIC                          VALUE
CROSS-SECTIONAL SHAPE STYLE             RECTANGULAR                                      
HOLE DIAMETER                           0.515 INCHES MINIMUM AND 0.547 INCHES MAXIMUM    
PERIPHERAL SHAPE STYLE                  ROUND                                            
CENTER HOLE SHAPE STYLE                 ROUND                                            
THICKNESS                               0.234 INCHES MINIMUM AND 0.266 INCHES MAXIMUM    
OVERALL DIAMETER                        2.109 INCHES MINIMUM AND 2.141 INCHES MAXIMUM    
MATERIAL                                STEEL COMP 1018 OR STEEL COMP 1019 OR STEEL COMP 
                                        1022 OVERALL                                     
MATERIAL DOCUMENT AND                   AISI ASSN STD ALL MATERIAL RESPONSES OVERALL